China Watch : Yema’s Maestro vans are on life support…

Erik van Ingen Schenau

New Maestro vans await completion

New Maestro vans await completion

The MG TF/ZR/ZT and Rover 75 are not the first former BMC>MG models to be manufactured in China. The original production lines for the Morris Marina and the Austin Maestro were also sold to the Chinese and, ironically, both ended up in different factories located in the city of Chengdu.

I reckoned that was reason enough to visit Chengdu and discover what had happened to those production lines. The Marina’s tale is a short one: I didn’t find a single Marina, Marina van or pick-up in the streets of Chengdu. The old FAW factory has long since been closed and demolished. The social unrest at this backward factory had led in to an unprecedented demonstration on the Chengdu streets in 2003 and that gave the regime good reason to close the factory and fire the workers. No, there is nothing left of the Chinese Marinas.

The Maestro-line was first sold to a tobacco company in Shandong province, named Etsong (or Yizheng in Chinese). That company managed to produce a small series of Maestros and Maestro vans but, in 2003, the line was sold again to the Chengdu-based Sichuan Auto Industry Group Company Limited, which produces vehicles under the Yema brand. Sichuan Auto is a very small company with a long history of building strong SUVs in extremely small quantities – they are, though, particularly suitable for the rough roads of South West China.

A visit to a small manufacturer like Sichuan Auto is not easy. Nobody speaks English but, more importantly, people don’t understand why there is foreign interest in their factory and products. When one tries to make an appointment, there is always the promise to call you back, but they never call you and emails are not answered. There is only one solution: just go there.

The result: a plant with a production capacity of 10,000 cars per annum which produces just 100 cars a year. Yes, the Maestro still survives, but probably not for long…

Sichuan Auto lies 30 km from the Chengdu city centre, in a large industrial area, and not far away from a new Volkswagen complex. The factory has two divisions: left a bus factory, right the automobile factory. The receptionists were very friendly and, after two hours of phone calls and taking me from one office to the other, they decided that I was welcome and that the Sales Department should have the job of showing me around.

My first impression was that the factory was clearly very clean. However, when I had looked into the production halls, there was something strange: where were the workers? I counted 10 to 15 men throughout the whole factory – the friendly girl who showed me around claimed that there was a workforce of 750. Just two men are welding in the massive Welding Hall and three are working in the Paint Hall…

Two cars seem to be in production: the SQJ 6450N, a 4-seat van which is, in fact, an updated Maestro van (which also exists as two-seat van, the SQJ 6450) and the SQJ 6451, a small 4×2 SUV-like car based on the Maestro platform. The body of this car resembles the previous generation Subaru Forester.

I was allowed to take the SQJ 6451 for a short test drive around the factory facilities. The engine sounded strange: a very high-tone noise. It is the CQ4C15 engine, which is based on the old 1498 cc Toyota 5A and made at a sister factory in Mianyang near the epicentre of the devastating earthquake of May 2008.

OK, they let me walk around and take pictures. Only one strange restriction: I was not allowed to take pictures of… cars. A strange request: how to do you take photographs in a car factory without photographing the cars?

I spotted two heavier SQJ 6485s in one of the halls. This model is a much bigger (Toyota Land Cruiser size) 4×4 SUV. It is not clear whether these cars are already in production or that it is the intention to produce them in the near future.

Another product is the M72. This was a 2000 concept from Matra of France. Sichuan Auto is copying this concept. I counted five test models in different stages of assembly. They were completely hand-made and I was told that they were used to test different alternative-fuel engines, like CNG (natural gas, very popular in Chengdu), electrical engines and hybrids. I distinguished two different models. Here, though, I really had no chance to take photographs.

The quality of the cars was poor – they were very cheaply and roughly built and no match for the competition. I was disappointed to find a clean and nice factory with a lot of potential which was seemingly being underutilised because of a lack of expertise and effective management.

The result: a plant with a production capacity of 10,000 cars per annum which produces just 100 cars a year. Yes, the Maestro still survives, but probably not for long…

[Editor’s Note: Erik van Ingen Schenau is one of Europe’s leading experts on the Chinese Automotive Industry and runs the Chinese Motor Vehicle Documentation Centre website.]

 

Keith Adams

About the Author:

AROnlineholic between 2001 and 2014 - editor of Classic Car Weekly, and all round car nut...

No Comments on "China Watch : Yema’s Maestro vans are on life support…"

Trackback | Comments RSS Feed

  1. Andrew Elphick says:

    Very interesting, esp the faux Subaru – the windscreen and (re) skinned doors show the past, so could have ARG carried out Roy Axe’s request to lose the swage?

  2. Keith Adams Keith Adams says:

    I have pics that I’ll upload that show it could have been done at Longbridge 25 years ago :)

  3. Richard Kilpatrick Richard Kilpatrick says:

    Hmm. I made a comment about China making bodyshells for classics and it vanished :(

  4. Trevor Paul says:

    “The body of this car resembles the previous generation Subaru Forester.” I thought when I read the text then looked at the pictures that this was indeed a Subaru Forester that the author was using to travel around in! Only when seeing the production pictures, did it become apparent that this is indeed the car they are manufacturing. An incredible facsimile. Shame to see the last of the Maestros being constructed. Like watching the slow death of a much loved friend.

  5. Mark Pitchford says:

    I recall having a new Maestro; D89 FFA – a red 1.6L with the blacked out door bottoms. I also recall travelling at around 80-90mph down the A38 dual carriageway just outside Derby (sorry officer) when I found some lunatic approaching me in my lane from the opposite direction. All I had time to do was to swing the wheel hard to the left. The car wobbled a bit but was generally unperturbed. That handling, combined with the fact that there happened to be space in the left lane to accomodate me, contributed greatly to the fact that I am here to tell the tale. If only it had been a looker … and the rear wheel arches hadn’t been made of cheese.

  6. Ken Strachan says:

    Given the comments above re. quality, they would probably have the same problem as UK built Maestros and Montegos, of rusting from the seams outwards. I know their paint supplier told AR off for leaving unpainted shells standing over weekends.

  7. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  8. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  9. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  10. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  11. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  12. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  13. Mr Robert Todd says:

    only blaim all the big men ? and designers Mastro Marina Montegos = you for got about the wedge shape = time has move on now so some chinese company has Maestros vans that need finished off bye for now and good luck

  14. Mark Pitchford says:

    @Mr Robert Todd
    Pardon?

  15. Andrew McCheyne says:

    What is that green and grey thing meant to be?

  16. Mark Pitchford says:

    @Andrew McCheyne
    I think that is the M72 referred to in the text. Looks like a Smart car type thing to me.

  17. Chris Chapman says:

    Nice article – your persistence in getting into the factory is to be congratulated! (Also useful info on what happened to the Chinese Marina/Ital factory.) I wonder where the pressings are made? Yema’s site seems to be yet another brand new Chinese factory built to a very high standard but very little sign of any components/work in progress – getting money to build and equip a factory seems to be no problem but funding working capital is a completely different issue?

  18. David says:

    An interesting article, although does anyone know where I can buy an unused ‘new’ bodyshell for a Maestro car to enable me to rebuild my accident-damaged MG 2.0i, after a seller of one I had already agreed to buy from them sold it to someone else? Answers, please if you know of one. Even better if it is in the UK.

  19. Robin Wasteney says:

    What a fantastic article!!! Reminds me of the days when I was a Project Engineer at Cowley. The painted bodyshells were scattered everywhere waiting to go on the line. The Maestro based small SUV just shows what is achievable and although its difficult to actually judge what its like, its appearance was good. Interesting to see that the picture of the floorpan still has the holes for LH/RH drive. It makes you wonder what happened to the Montego line and in particular the pressing facilities for the plastic Mini that was produced in South America (Peru I think). I did drive one and as it was so light it was extremely fast – something you don’t think of with the ‘A’ series engine. I gather that at one time there were a number of plastic Mini’s driving around S. America

Have your say...