Carrozzeria designs : Michelotti

Michelotti

Michelotti’s long standing association with Triumph started in 1956 when, during the development of their new small car (at the time, known as Zobo), they were approached by a jobbing Italian stylist, who offered to produce a body style for this car for the sum of £3000.

Rather bemused, Harry Webster accepted, and three months later the new and well-prepared prototype duly appeared. This model would form the basis of the Triumph Herald, and needless to say, Webster was so impressed he used the designer, Giovanni Michelotti, to design all of the company’s subsequent cars (with the notable exception of the Karmann-styled TR6). As with the BMC-Pininfarina link, the Triumph-Michelotti partnership did not survive for long in the new BLMC regime.


Triumph stag prototype
Michelotti's first proposal for what was to become the Triumph Stag. This model was designed by Giovanni Michelotti in Italy in 1965, following the work that the Italian styling house had already completed for Triumph (Herald, 2000 and the forthcoming 1300/Toledo models). Harry Webster had donated a Triumph 2000 for Michelotti to use for a basis for this car, but when the Triumph chief saw the prototype, he snapped it up for himself and had the car returned to Triumph for evaluation. It never did stand on the Michelotti stand at the 1966 Turin Motor Show. The final car did, however cause a splash when it was launched in 1970.

Morris Marina prototype
This proposal for the Marina (ADO28) was favoured by Harry Webster. It was eventually turned down because of the fear of it costing too much to build.

Michelotti Triumph prototype
This is Michelotti's proposal for the late 1960s Triumph Lynx project. The name was later revived for a proposed fastback version of the TR7, but neither car made it to the showroom.

Michelotti's proposal for the Rover P10. This project eventually led to creation of the Rover SD1.
Michelotti's proposal for the Rover P10. This project eventually led to creation of the Rover SD1.

ADO70 was a Mini-based sports car proposal commissioned in 1970.
ADO70 was a Mini-based sports car proposal commissioned in 1970.

The 1972 Leyland-Crompton electric car prototype, with Michelotti body on Mini underpinnings.
The 1972 Leyland-Crompton electric car prototype, with Michelotti body on Mini underpinnings.

This was Michelotti's proposal for project ADO74, BLMC's first serious attempt at developing a car to replace the Mini.
This was Michelotti's proposal for project ADO74, BLMC's first serious attempt at developing a car to replace the Mini.
Keith Adams

10 Comments

  1. I am trying to contact EDGARDO MICHELOTTI to try and buy copies of some of the drawings and photographs he said he has in the Michelotti archives but I have not had any replies to my emails since 2009
    Do you know what has happened to him or the archives ?
    Kind regards
    Kelvin Smith

  2. HI

    Ihave the same problem Mr. Edrgardo replies no (never)mail.
    I have tied to reach him but… never an answer.

  3. I have recently had a email from Edgardo–apologising for the long delay in replying to me –he has been very busy and has had some family problems -ill health of a close family member .
    Be patient and I am sure he will be in touch
    All the Best
    Kelvin Smith
    May 2014

  4. Hi To all who have had no luck in contacting Edgardo .
    I have heard from a third party that Edgardo is alive and well but is very busy and has not had time to go through and catalogue the vast amount stuff that he inherited from his father so I guess we will all have to be patient
    All the best
    Kelvin Smith

  5. Between his involvement with Bullet/Lynx and later on Broadside (the latter of which influenced the Reliant Scimitar SS1), did Michelotti produce a counter-proposal to Harris Mann’s TR7 design or ways to improve the styling prior to Broadside?

  6. Though Harris Mann was tasked with styling the Austin Allegro, is it known whether Michelotti provided any styling proposals beyond the ADO16-based Austin Apache/Victoria?

    • Hi Nate, late reply to this.

      No he did not, this was because Webster bringing in the Italians for the Marina and caused big political frictions which in part led to Haynes leaving. Also the Marina completely blowing its budget, meant the Allegro’s development was kept under very tight budget control. One of the politically easiest savings to make in the Allegro’s development was thus not involve the external styling consultants.

      The rest as they say is history.

  7. It has been a few years and agree it largely unfolded as mentioned regarding external styling consultants.

    At the same time since then, reached out to Michelotti’s son with my query at the Michelotti Historical Archive a while back who confirmed his father did indeed do some proposals for both the Allegro as well as the Maxi of which he only has a few drawings (that have yet to see unfortunately).

  8. Does anyone know anything about a Michelotti Shellette based on an ADO16 platform? One has been spotted with Swiss registration. Normally this car was built based on Fiat 850 platform, and a few were built on a Daf 33 platform. But this car clearly has a much longer wheelbase than the Fiat/Daf, and some details are clearly BMC. Any info would be appreciated.
    See https://i.postimg.cc/R9ZbjGz0/BMC-ADO016-shellette.jpg

Leave a Reply

Your email address will not be published.


*


This site uses Akismet to reduce spam. Learn how your comment data is processed.